Download Free Trial

ProgeCAD 2020 Professional

Minimum system requirements

OPERATING SYSTEM:
Windows 7®, Windows 8®, Windows 8.1® or Windows 10® 
32 bit and 64 bit are supported (Windows Vista® is supported but not recommended)
(WARNING: The installation on virtual machines is not certificated).
CPU:
1 GHz or faster (recommended almost 2.5 GHz) 32-bit (x86) or 64-bit (x64) processor
RAM:
Minimum 4 GB (8 GB recommended)
DISK SPACE:
4 GB of free space
VIDEO CARD:
For optimum performance, it is recommended to use machines with a dedicated video card nVidia or AMD

Registration of a progeCAD license

Follow the instruction of the Registration Wizard which is automatically displayed starting the registration procedure. If you encounter any problem, please get in touch with the Customer Service.

Download Free Trial

GeoMapworks

Minimum system requirements

Geomapworks requires installation of ProgeCAD

OPERATING SYSTEM:
Windows 7®, Windows 8®, Windows 8.1® or Windows 10® 
32 bit and 64 bit are supported (Windows Vista® is supported but not recommended)
(WARNING: The installation on virtual machines is not certificated).
CPU:
1 GHz or faster (recommended almost 2.5 GHz) 32-bit (x86) or 64-bit (x64) processor
RAM:
Minimum 4 GB (8 GB recommended)
DISK SPACE:
4 GB of free space
VIDEO CARD:
For optimum performance, it is recommended to use machines with a dedicated video card nVidia or AMD

Installation Instructions for using GeoMAPWORKS with ProgeCAD:

STEP 1 – Download and install ProgeCAD per instructions.

STEP 2 – Download Geomapworks by clicking on the download link.

STEP 3 – Once the download is complete, unzip the resulting Geomapworks.zip file (usually located within your DOWNLOADS folder) to where you wish for the GEOMAPWORKS folder to be stored.  Remember where you stored the folder and proceed to the next step.

STEP 4 – Edit the ICAD.LSP file using Notepad as follows:

The line below must be edited to reflect the path of where you place your GEOMAPWORKS folder. You can place the folder anywhere on your hard disk. For instance, if you place the folder under drive C then the path would be changed to:

c:\geomapworks

If you place the folder in any other folder it will more than likely be:

“C:\\user\geomapworks” where is replaced with your computer name.  If your computer name is “Eddie” then the statement would read:

(SETQ g:geodir “c:\users\Eddie\documents\GeoMapworks\”)

Be sure to save your ICAD.LSP file once you have completed editing.

STEP 5 – Launch ProgeCAD and then use the APPLOAD command to select the ICAD.LSP file contained within the GEOMAPWORKS folder.  Alternatively, you can right-click the ProgeCAD icon, select Properties, and change the “Start In” setting to reflect the location of your GeoMapworks folder.

STEP 6 – Use the MENULOAD command to load GEOMAPWORKS.MNS which is included within the GEOMAPWORKS folder.   Be sure to select *.MNS file type to be able to see this file as listed within your GEOMAPWORKS folder.

STEP 7 – Registering your Software – The Trial Copy allows use of the GeoMapworks software for 30 days before purchase and registration is required.  After 30 days, GeoMapworks will cease to function without registration.  Once installed and purchased, we will email you a License Code as well as instructions on how to register your software.

Installation Instructions for using GeoMAPWORKS with AutoCAD (or Civil 3D):

STEP 1 – Download and install AutoCAD or Civil 3D per Autodesk instructions

STEP 2 – Download Geomapworks by clicking on the download link.

STEP 3 – Once the download is complete, unzip the resulting Geomapworks.zip file (usually located within your DOWNLOADS folder) to your DOCUMENTS folder.  This will create the GeoMapworks folder within your DOCUMENTS folder.  The complete path name for your DOCUMENTS folder typically uses the following path:

c:\users\

STEP 4 – Edit the ACAD.LSP file using Notepad.  Replace the word “CHALK” with and then SAVEAS to ACAD.LSP.

STEP 5 – Launch AutoCAD and use the APPLOAD command to select the ACAD.LSP file contained within the GEOMAPWORKS folder.  Be sure to include this file in your STARTUP SUITE to insure that the application loads in every AutoCAD session.

STEP 6 – Use the MENULOAD command to open the GEOMAPWORKS.MNS menu file which is located within your Geomapworks folder (within your DOCUMENTS folder).

STEP 7 – Registering your Software – The Trial Copy allows use of the GeoMapworks software for 30 days before purchase and registration is required.  After 30 days, GeoMapworks will cease to function without registration.  Once installed and purchased, we will email you a License Code as well as instructions on how to register your software.

Download Free Trial

Global Mapper

Minimum system requirements:

Global Mapper software is compatible with Windows 8/10 (64-bit version), and Windows Server 2008 rc2/2012/2016/2019. The minimum system requirements are 4 GB of RAM and 500 MB of hard drive space for the installation.

Important License Note. You may download and evaluate any version on this page, however, if you currently own Global Mapper 21, and plan to move to 21.1, a new license is required. The licenses for the most recent releases are available to users who have active Maintenance and Support. Users with out of date M&S will have to renew M&S to access the software. Please contact authorize@bluemarblegeo.com with any questions or concerns.

Installation Instructions:

Once your download is complete, simply run the downloaded file to install the Global Mapper application.